• FCC approved
• Built-in Auto Switcher
• Simple Pushbutton Controls
• Automatic Memory of Selected Channels even during power failure
• Long range with up to 4 remote transmitter cameras (#AS-1000T)

The Receiver console component  (AS-1004R) comes equipped with a built in four channel scanner and large 7 segment digital display so you will always know the channel being viewed.  A freeze button is used to hold the channel and stop the scanning process.  Unused cameras can be skipped during scanning.

Range is up to 300 feet within a home or office setting, much higher if line-of-sight.  The 2.4 GHz technology allows multiple cameras, though signal strength is dependent somewhat on obstacles between transmitter and receiver.   A high 3 dB gain rubber duck antenna is employed to maximize transmitter distance.

Additional wireless cameras can be purchased (Model #AS-1004T).  If more than 4 locations must be monitored, but not simultaneously, unused cameras can be switched on of off as needed.  For example, if 6 cameras are used, three cameras can be used for the front of a building during the day, and three can be used for the rear at night.  The receiver can still accommodate the three cameras, so by juggling cameras a wider coverage area can be handled. 

Includes:
1.  Wireless Camera with 3" Rubber Duck Antenna
2.  12 Volt/500 mA Power Adapter  (#XF-201) for transmitter
3.  Wireless Receiver Console with 3" Rubber Duck Antenna
4.  12 Volt/500 mA Power Adapter (#XF-201) for receiver
5.  Complete mounting hardware with Ball/Swivel Mount
6.  Color Coded Video and Audio plugs, Male RCA to Male RCA 5 feet for monitor hookup

Frequencies:                2.40, 2.427, 2.454, 2.481 GHz 
Modulation:                 FM, PLL
Current consumption:   200 mA
Output power:             <10 mW
Channels dip switch:    3
Dimensions:                 2 ¼" L x 2 5/8" W x 3 ½" D
Controls:                     Dip Switches for selecting
                                   of  Channel 1, 2, 3, 4
In/Out Connections:    None
Power Adapter:          DC 12V/500mA  (#XF-201)

Summary Description: 
Wireless Black/White CCD camera with 2.4 GHz transmitter with 420 TV lines resolution.  User can select Channels 1 to 4.

Summary Description: 
Wireless System includes:  one Camera with 2.4 GHz transmitter and receiver, capable handling total of 4 wireless cameras, Range: > 300', 1/3" CCD camera, 3.6mm lens, with 420 TV line, include power adapters. 7-segment LED displays the current scan channel. Output utilizes a female RCA connector for Video Out and Audio out (one channel).

• Convert existing covert wired system to wireless
• Attractive pricing
• Small foot print for transmitter; easy to conceal
• Built-in switcher and auto-scan function for upto 8 channel.
• Compatible with all of MATCO’s board, covert, and wall mount cameras
• Universal design for NTSC and PAL

Video In :                 All formats, B/W and Color
Antenna:                  3" Rubber Duck /w
                                SMA connector
Power Supply:          12-15 V/500 mA (#XF-201).
                                 Requires minimum 15 volts 
                                 or special tap 10-18VDC
                                 @150mA

Dimensions:            2-1/4"L X 1-7/8"W X 5/8"H 

DESCRIPTION:
Compact DSP (Digital Signal Processing) transmitter allows up to 59 user selectable frequencies.  Only 8 are currently available on receiver in the 2.4 GHz range.  Kit works with #AS-1000R receiver.

Color and Black and White Video are supported as well as any of the world-wide video signals.  Stereo audio inputs (Left & Right) are standard.  No  tuning adjustments required!   Frequencies are selected by a dip switch.             Requires #XF-201 Wall Power Adapter.

Frequencies:             2.400, 2.427, 2.454, 2.481 ... GHz
Video Output:           RCA type 75 ohms 1 V P-P
                                B/W or Color
Audio Output:           RCA type 600 ohms 1V P-P 
                                for Channel L and R
Scan Rate:                1.5 seconds per channel fixed
Maximum Channels:  4 Upgradeable to 59 with 
                                 Modification Kit
De-Modulation Method: FM. PLL
Antenna:                    3" Rubber duck /w 
                                  SMA connector
Power Supply:           Requires #XF-201, 
                                 12-15 V/500 mA
Requires minimum      12 VDC @ 200 mA
Dimensions:                5-¾"L X 2-¾"W x ¾"H.

DESCRIPTION:
High performance and high selectivity wide bandwidth receiver handles Black and White or Color images as well as stereo output.  Built-in programmable 8 channel switcher to choose specific scanned outputs.  Individual stations can be also selected manually.   Contrast control adjustment.  Range over 900 feet line of sight; approx 250 - 400 feet in office or home setting.

• For legal use only
• 2.4GHZ Wireless Signal Boost for Audio / Video
• Max Power 1W
• Easy to install between antenna and transmitter

Uses 12 volt power (XF-201 or XF-200) supply

• 6 dB High Gain Patch Antenna dB
• to be used with AS1004T, AS1004R, ASK-2000T or ASK-2000R. 
• Will increase useable distance by approximately 60' for AS1004 and 200' for ASK-2000.
• 2.5"X 2.3" X 5/16" paddle on 2" stand.

• 10 digit LCD display
• Built-in rechargeble battery
• 9V battery charger included 
• Ultra sensitive synchronous detector
• 16 section bargraph to show signal strength
• High speed 300 MHz direct counter with 0.1Hz Resolution

4 selectable gate speeds.

• 1/4 Wave Rubber Duck Right Angle Antenna. 
• For 2.4 GHz Wireless Applications 
• SMA Connector