• Built-in CNP-101 pin hole B/W or Color camera
• Pin hole size 3.6mm.
• Smoke detector type size: 5 1/2"(D) X 11"(H) 
• Built-in RCA and power connectors

The PS-102, Simulated Smoke Detector is comprised of a high resolution Black and White Camera with over 400+ lines of horizontal resolution. 

A standard 2.1 mm plug is provided for power, however it should be noted that this system requires a Positive Center, which can be obtained from MATCO, Part Number XF-200. Use with any other power supply may result in damage.

A RCA female jack is provided in the interior of the unit for easy connection to any standard video cable. Video cable length should not exceed 200 feet. We also provide 50' cable which can be extended in 50' increments. The part number is A-402-CA.

To open and close the case, a TRIANGLE is located on the outside enclosure. Simply, move the inner case toward you while holding the outer case in place. Power and RCA cables can be routed easily through the large opening.

Optional: -C for color version.

• Built-in CNP-101 pin hole B/W or Color camera
• Pin hole size 3.6 mm.
• Clock type size: 11" square
• Built- in RCA and power connectors

A functioning 11" square clock with a quartz-type movement is combined with a high resolution Black and White Camera with over 400+ lines of horizontal resolution.  The clock is powered by a standard 1.5 volt AA battery. 

A standard 2.1 mm plug is provided for power, however it should be noted that this system requires a Positive Center, which can be obtained from MATCO, Part Number XF-200. Use with any other power supply may result in damage.

A RCA female jack is provided in the interior of the unit for easy connection to any standard video cable. Video cable length should not exceed 200 feet. We also provide 50' cable which can be extended in 50' increments. The Part number is A-402-CA.

Optional: -C for color version.
 

• Built-in CNP-101 pin hole B/W or Color camera
• Pin hole size 3.6 mm.
• Working Exit Sign.
• 8 3/4"(H) X 12"(W) X 1.2"(D)
• Built-in RCA Female for Video
• Built-in 9VDC/400MA power adapter

A functioning exit sign with 2 long life light bulbs and Black White Camera with over 400+ lines of horizontal resolution. The unit directly uses 110VAC.

A RCA female jack is provided in the interior of the unit for easy connection to any standard video cable. Video cable length should not exceed 200 feet. We also provide 50' cable which can be extended in 50' increments. The Part number is A-402-CA.

Mounting bracket and screws are included.

Optional: -C for color version.